Frequently Asked Questions

The installation requires basic manual skills (measuring, drilling, screwing). We recommend having the work carried out by a craftsman. You can download installation instructions here

For logistical reasons, the carrier rods are supplied in units of a maximum length of 2 metres. If you order more than 2 meters, you will receive several poles according to the length. The individual rods can then easily be screwed together. All preparations have already been made ex works. No tools are required for this step.

To do this, you must screw the carrier rods onto the "Feeder Single Part [Link]". You can simply plug the cable end into the supply unit. Attention! Please note the colour coding: red plug = red socket; black plug = black socket

We supply you with a standardised cold appliance connection cable. With this cable you can easily connect the supply unit to your socket. Alternatively, you can also order a longer connection cable here.

There are two types of mounting:
You can screw the unit to the wall, you will find 2 holes on the back of the supply unit. Alternatively, you can operate the power supply horizontally (on a shelf or similar).

Depending on the condition of the wall, you will need suitable screws/plugs. Also make sure that the brackets are evenly distributed along the entire length of the support rods. The distance from beam to beam should not exceed 1 meter.